Several GL iNet router devices are used by the networking users. Performing GL iNet Setup is very simple and quick using a web interface. You can easily use the device without installing the GLiNet app. If you are not aware of step by step instructions to configure the device without using the app then this information is for you. By following the below step by step guide you can easily add the router device and enjoy high speed internet even during travel. This for the mentioned breakdown of the process is very simple and easy to understand. Following these steps anyone can configure their device without any hassel.

Power Up The Router

You need to initiate the setup procedure with the device power. Power up the device by connecting it to a power source if you don’t have a chargeable router device. If the device you have is a chargeable device then charge it first by connecting to the power source and then start it.

Choose Client Device

When the device boots up and gets stable, you need to initiate the procedure further by using a client device. You can use a computer or laptop or smartphone device in which a web browser is installed. Check the version of the web browser and update it to proceed with the setup. An outdated web browser may create trouble for you to access the setup page.

Connect To Router Network

Moving further in the GL iNet Setup procedure you need to connect the router device with the client device. For connection you have two methods. Out of the two methods you can go with any one and initiate the process. 

• Wired method: In the wired method of connection you have to search for a working ethernet cable to connect the client device with the router device. 
• Wireless method: In wireless connection method you need to access the wireless network of the router by using the default network name and password. Rush to the wireless settings on the client device and search for the available networks. Choose for your GL iNet router network and the screen will prompt you to fill the password. In the password field specify goodlife and then hit on connect option.

Launch Web Browser

Moving to the next step of the process you need to launch the browser. You can use Mozilla Firefox, google chrome, microsoft edge or any other web browser. Don’t forget to clear cache and cookies from the browser to get access without any problem. 

Access Web Interface

In the URL bar of the web browser you need to specify the IP or web address to open the GL iNet Setup page. Once the page appears on the screen you need to follow the screen to get access to the dashboard. To enter the dashboard you might require default login credentials. Enter the details and submit the information to reach the page.

Configure Settings

Once you reach the dashboard you have to start the configuration of the device. Connect the router with the internet by choosing the type of internet you are going to connect it with. After that the screen will help you to establish a connection. Once the connection is done, replace the default login name and password. In addition to this you have to make several customizations as per your requirement and device feature. The screen will help you to make changes. Submit the changes by press on submit button.

Test Network

When the device is ready to use after configuration you have to perform a speed and coverage test. This test is equally important to know whether the process you follow is appropriate (you have done correct configuration) or not. 

Conclusion

GL iNet Setup is not hard at all if you follow the above given process step by step as mentioned. In case you have any doubt or you are not able to reach the login interface then you should connect with an expert. An expert can guide you with the setup steps or troubleshoot the mistake you are making. Hope you do not need to connect the expert and the steps given in this article will be enough.