Is your home network not appropriate? Are you facing trouble with your router network speed and coverage? Is there a dead spot area at your home? If the answer to all the above questions is yes then here we have the best solution for you. Linksys WiFi Range Extender Setup will give you what your router alone is unable to. With the addition of this range extender device you will get better network coverage and speed all over your home. You can enjoy a stable network connection by configuring the range extender device. The configuration process is not so hard at all. If you know the right steps to add the device, you can do it by yourself. By reading the further specified guide you will be able to know everything about configuration. We break down the process into easy to understand steps. 

Installation of Devices 

Installation of the range extender device is very important prior to proceeding with Linksys WiFi Range Extender Setup. Installation of range extender involves following steps:

• To install the device you have to unbox it properly. Remove all the packaging and check the box has an extender device along with a user guide and ethernet cable.
• Start looking for a place to put the extender. The place should be closer to the router device. You can relocate the device once the configuration is done.
• Once the placement has done you can initiate the boot up process. To boot up the device you have to connect it with power. If your range extender device is a wall compact then you have to connect it directly on the wall socket. If not then you have to use the adapter to power it up. 
• Wait until the device boots up properly and stabilizes.

Configuration of Devices 

Now you can initiate the Linksys WiFi Range Extender Setup procedure by follow the below given steps:

• First of all, choose a client device such as laptop, computer or smartphone in which a web browser is installed.
• Next, connect it with the range extender network using the wired or wireless method of connection.
  • Wireless connection requires a wireless network name and password. In the client device, go to wireless settings to search for the wireless network name. Click on the device network name from the appeared list and enter the password. Click on connect option and you will get connected to the network.
  • The wired method is the most secure way of connection. To use this connection method you need an ethernet cable. Make sure your device supports wired connection via ethernet cable to initiate with this method of connection. Inject the cable into the ethernet port on both the devices appropriately.
• Once the connection is done, you can launch a web browser in the client device to access the setup page. 
• In the URL bar of the browser you have to specify the web address or IP address to open the page. The IP address or web address you can use to reach the setup page is 192.168.1.1 or extender.linksys.com.
• As the page displays on the screen you have to enter the dashboard by specifying the username and password. Use the default login credential to enter the dashboard. 
• From the dashboard you have to start configuring the device. Connect the range Extender with the router network using the routers SSID and password. 
• Meanwhile you have to create a new SSID for your router Network and a strong password. 
• In addition to this you have to replace the admin login credentials and other additional settings also. 
• Don’t forget to update the firmware prior to saving the setting. 
• Click on save option and let the device apply changes. 
• Test the network at last and relocate the device to a better location somewhere in between the placement where you are facing trouble and the router’s placement.

Conclusion

From the crux of the above description I would like to conclude my words by saying that Linksys WiFi Range Extender Setup is a simple and easy task. By following the above given steps you can easily configure the device. In case you have any doubt you can connect a technical expert who can assist you with the possible solutions.